Anycubic Water Wash Resin 2.0 – Black

What this part is

<p><strong>Water-washable UV resin | Compatible with 365–405 nm MSLA/LCD printers | Black finish for detailed prints | Rinse clean with water — no harsh solvents needed</strong></p> <p>The ANYCUBIC Water Wash Resin 2.0 Black is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results.</p> <h3>Features</h3> <ul> <li>Water-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing</li> <li>Compatible with 365–405 nm MSLA/LCD resin printers</li> <li>Black colour for display models, miniatures, and detail-focused prints</li> <li>Cured hardness of 82–85 HD with tensile strength of 38–43 MPa</li> <li>Low volume shrinkage rate of 2.2–5.5% for dimensionally accurate output</li> <li>Post-cure in 3 minutes at 405 nm UV (25,000–30,000 µW/cm²)</li> <li>Post-cured resin disposable as standard plastic waste</li> </ul> <h3>Specifications</h3> <ul> <li>Colour: Black (#212721)</li> <li>Resin Size: 1kg</li> <li>Pre-print preparation: Shake well before use</li> <li>Print environment: 20-40 ℃</li> <li>First layer exposure duration: 25-40 s</li> <li>Normal exposure duration: 2-2.5 s</li> <li>Print temperature: 20-50 ℃</li> <li>Material: Hydrophilic group-modified light-curing resin</li> <li>Wavelength: 365-405 nm</li> <li>Viscosity: 190-230/mPa·s(25℃)</li> <li>Density: 1.07-1.09/g/cm³</li> <li>Hardness: 82-85 HD</li> <li>Tensile Strength: 38-43 MPa</li> <li>Elongation at Break: 16-22%</li> <li>Bending Modulus: 48-60 MPa</li> <li>Bending Strength: 2300-3000 MPa</li> <li>Young’s Modulus: 1100-1300 MPa</li> <li>Izod Impact Strength: 133 J/m</li> <li>Volume Shrinkage Rate: 2.2-5.5%</li> <li>Cleaning: 95% IPA</li> <li>Washing duration: ≥3 mins</li> <li>UV Wavelength: 405 nm</li> <li>Curing Temperature: 18-30 ℃</li> <li>UV Intensity: 25000-30000 uW/cm²</li> <li>Curing time: 3 mins</li> <li>Disposal: Post-UV-curing resin is treated as plastic waste</li> <li>Cleaning: Water</li> <li>Washing duration: Medium ≥5 min</li> <li>UV Wavelength: 405 nm</li> <li>Curing Temperature: 18-30 ℃</li> <li>UV Intensity: 25000-30000 uW/cm²</li> <li>Curing time: 3 mins</li> <li>Disposal: <ul> <li>1. Do not drain wastewater into sewers to avoid contaminating groundwater.</li> <li>2. After cleaning, let the wastewater sit in the tank for a period of time.</li> <li>3. Place it under sunlight to allow the resin in the tank to fully cure.</li> <li>4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.</li> </ul> </li> </ul> <h3>What’s in the Box</h3> <ul> <li>Anycubic Water Wash Resin 2.0 – Black x1</li> </ul>