Anycubic PLA Silk Tri-colour Filament 1kg – Blue/Green/Purple

What this part is

<p><strong>Tri-colour silk gradient in blue, green &amp; purple | Adjustable gloss finish | Flexible and reliable printing | Compatible with 1.75 mm printers | Ideal for decorative prints and artwork</strong></p> <p>The Anycubic PLA Silk Tri-colour Filament in Blue/Green/Purple is designed for makers who want their prints to go beyond the ordinary. This 1 kg spool combines three complementary colours — blue, green, and purple — into a single filament that produces natural gradient transitions and a lustrous, silk-like surface finish as the print builds layer by layer. By adjusting nozzle temperature and print speed within the recommended range of 210–240 °C and 50–250 mm/s, you can dial the surface sheen from a subtle satin to a high-gloss finish, giving you direct control over how the final model looks. The filament has passed extensive bending and tearing tests, delivering the flexibility needed for smooth, uninterrupted runs — making it a reliable choice for decorative parts, fan art, and artistic models. Compatible with any 1.75 mm filament printer using a 0.4 mm or larger nozzle, it slots into your existing workflow without fuss.</p> <h3>Features</h3> <ul> <li>Tri-colour gradient (blue, green, purple) produces rich, layered colour transitions across the printed surface</li> <li>Silk-like luster shifts with viewing angle, giving finished models a premium, eye-catching finish</li> <li>Controllable gloss — raise nozzle temperature or lower print speed to increase surface smoothness and shine</li> <li>Printing temperature range of 210–240 °C and recommended speed of 50–250 mm/s suits a wide range of FDM printers</li> <li>Compatible with any 1.75 mm filament printer fitted with a 0.4 mm or larger nozzle</li> <li>Proven flexibility through extensive bending and tearing tests for reliable, uninterrupted printing</li> <li>Complies with RoHS, REACH, and SDS certifications</li> </ul> <h3>Specifications</h3> <ul> <li>Colour: Blue Green Purple (#003594,#006F44,#452B6F)</li> <li>Dry Out Before Use: Recommended</li> <li>Drying Condition: 55-65℃, 6-8h</li> <li>ACE Compatibility: Compatible</li> <li>Nozzle Size: Recommended 0.4 mm or above</li> <li>Printing Temperature: 210-240 ℃</li> <li>Heated Bed Temperature: 55-56 ℃</li> <li>Recommended Printing Speed: 50-250 mm/s</li> <li>Maximum Volume Speed (Flow Rate): 8 mm³/s</li> <li>Density: 1.22 g/cm³</li> <li>Melt Index: 9±1 g/10 min (190℃/2.16kg)</li> <li>Melting Point Temperature: 164 ℃</li> <li>Vicat Softening Temperature: 54 ℃</li> <li>Heat Deflection Temperature (0.45MPa): 53 ℃</li> <li>Young’s Modulus: 2000±200 MPa</li> <li>Tensile Strength: 37±4 MPa</li> <li>Elongation at Break: 28±5%</li> <li>Bending Modulus: 2400±160 MPa</li> <li>Bending Strength: 66±4 MPa</li> <li>lzod lmpact Strength (X-Y): 20±2 kJ/m²</li> <li>Tensile Strength (Z): 12±4 MPa</li> <li>Filament Type: Aesthetic filaments</li> <li>Recommend to Print: Decorative parts, fandom, artworks</li> <li>Intelligent Identification: Supported</li> <li>Reusable Filament Spool: Supported</li> <li>Size: 1KG</li> </ul> <h3>What's in the Box</h3> <ul> <li>Anycubic PLA Silk Tri-colour Filament 1kg – Blue/Green/Purple x1</li> </ul>