Anycubic PLA Silk Dual Filament – Black Green

What this part is

<p><strong>Silk-lustre dual-colour PLA filament | Striking Black Green gradient finish | Adjustable gloss via temperature and speed | Compatible with 0.4 mm+ nozzles | 1 kg spool</strong></p> <p>The Anycubic PLA Silk Dual Filament in Black Green is designed for makers and hobbyists who want their prints to stand out with a rich, layered aesthetic. Combining deep black and bold green in a single strand, this dual-colour silk PLA produces a flowing gradient effect that shifts and catches the light from every angle, giving decorative prints, fan art, and artworks a premium, polished look. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed delivers a high-gloss silky surface, while cooler, faster settings yield a subtler sheen. Compatible with any FDM printer using a 0.4 mm or larger nozzle, it runs cleanly at 210–240 °C with a heated bed set between 55 and 56 °C, and prints reliably at speeds from 50 up to 250 mm/s. Dry the filament at 55–65 °C for 6–8 hours before use for best results.</p> <h3>Features</h3> <ul> <li>Black Greencolour blend produces a lustrous, metallic silk finish</li> <li>1kg spool for extended printing sessions and larger projects</li> <li>PLA-based material — easy to print and widely compatible with FDM printers</li> <li>Intelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition</li> <li>Resilient and flexible — tested to resist breakage during feeding and multi-colour operation</li> <li>Prints at 210–240 °C nozzle temperature; heated bed at 55–56 °C</li> <li>Recommended print speed: 50–250 mm/s</li> <li>Reusable filament spool with threaded locking system to reduce entanglement</li> </ul> <h3>Specifications</h3> <ul> <li>Colour: Black Green</li> <li>Package Weight: 1 kg</li> <li>Dry Out Before Use: Recommended</li> <li>Drying Condition: 55-65℃, 6-8h</li> <li>ACE Compatibility: Compatible</li> <li>Nozzle Size: Recommended 0.4 mm or above</li> <li>Printing Temperature: 210-240 ℃</li> <li>Heated Bed Temperature: 55-56 ℃</li> <li>Recommended Printing Speed: 50-250 mm/s</li> <li>Maximum Volume Speed (Flow Rate): 8 mm³/s</li> <li>Density: 1.22 g/cm³</li> <li>Melt Index: 9±1 g/10 min (190℃/2.16kg)</li> <li>Melting Point Temperature: 164 ℃</li> <li>Vicat Softening Temperature: 54 ℃</li> <li>Heat Deflection Temperature (0.45MPa): 53 ℃</li> <li>Young’s Modulus: 2000±200 MPa</li> <li>Tensile Strength: 37±4 MPa</li> <li>Elongation at Break: 28±5%</li> <li>Bending Modulus: 2400±160 MPa</li> <li>Bending Strength: 66±4 MPa</li> <li>lzod lmpact Strength (X-Y): 20±2 kJ/m²</li> <li>Tensile Strength (Z): 12±4 MPa</li> <li>Filament Type: Aesthetic filaments</li> <li>Recommend to Print: Decorative parts, fandom, artworks</li> <li>Intelligent Identification: Supported</li> <li>Reusable Filament Spool: Supported</li> </ul> <h3>What's in the Box</h3> <ul> <li>Anycubic PLA Silk Dual Filament – Black Green x1</li> </ul>