Anycubic PLA Silk Dual Filament 1kg – Red/Blue

What this part is

<p><strong>Silk-gloss dual-colour PLA filament | Gradient colour shifting in a single pass | Adjustable luster via temperature and speed | 1 kg per roll | Compatible with all 1.75 mm FDM printers</strong></p> <p>The Anycubic PLA Silk Dual Filament in Red/Blue is designed for makers who want visually striking, multi-toned prints without the complexity of a multi-extruder setup. The dual-colour construction produces a rich gradient effect that shifts across the model's surface as each layer is laid down, delivering a premium silk-like luster that catches the eye from any angle. You can fine-tune the finish by adjusting nozzle temperature and print speed — a higher temperature or slower speed produces a smoother, higher-gloss surface, giving you direct control over the final look. Compatible with any FDM printer that accepts 1.75 mm filament, it prints at a nozzle temperature of 210–240 °C with a heated bed at 55–56 °C and supports speeds from 50 to 250 mm/s. Each roll weighs 1 kg and is rated for decorative parts, fan art, and artistic models where appearance is the priority.</p> <h3>Features</h3> <ul> <li>Dual-colour construction produces a seamless gradient effect across printed surfaces in a single pass</li> <li>Silk-like luster that shifts and deepens when the model is rotated, adding visual depth and a premium feel</li> <li>Adjustable finish — increase nozzle temperature or reduce print speed for a higher-gloss, smoother surface</li> <li>Compatible with all 1.75 mm FDM printers; no multi-extruder setup required</li> <li>Supports Anycubic ACE Pro intelligent identification for automatic filament recognition (internet connection required)</li> <li>Reusable spool with threaded locking system reduces entanglement and filament scatter</li> <li>Certified to RoHS, REACH, and SDS standards</li> </ul> <h3>Specifications</h3> <ul> <li>Colour: Red Blue (#E63888,#003594)</li> <li>Dry Out Before Use: Recommended</li> <li>Drying Condition: 55-65℃, 6-8h</li> <li>ACE Compatibility: Compatible</li> <li>Nozzle Size: Recommended 0.4 mm or above</li> <li>Printing Temperature: 210-240 ℃</li> <li>Heated Bed Temperature: 55-56 ℃</li> <li>Recommended Printing Speed: 50-250 mm/s</li> <li>Maximum Volume Speed (Flow Rate): 8 mm³/s</li> <li>Density: 1.22 g/cm³</li> <li>Melt Index: 9±1 g/10 min (190℃/2.16kg)</li> <li>Melting Point Temperature: 164 ℃</li> <li>Vicat Softening Temperature: 54 ℃</li> <li>Heat Deflection Temperature (0.45MPa): 53 ℃</li> <li>Young’s Modulus: 2000±200 MPa</li> <li>Tensile Strength: 37±4 MPa</li> <li>Elongation at Break: 28±5%</li> <li>Bending Modulus: 2400±160 MPa</li> <li>Bending Strength: 66±4 MPa</li> <li>lzod lmpact Strength (X-Y): 20±2 kJ/m²</li> <li>Tensile Strength (Z): 12±4 MPa</li> <li>Filament Type: Aesthetic filaments</li> <li>Recommend to Print: Decorative parts, fandom, artworks</li> <li>Intelligent Identification: Supported</li> <li>Reusable Filament Spool: Supported</li> <li>Size: 1KG</li> </ul> <h3>What's in the Box</h3> <ul> <li>Anycubic PLA Silk Dual Filament 1kg – Red/Blue x1</li> </ul>