Anycubic PLA Silk Dual Filament 1kg – Black/Red

What this part is

<p><strong>Dual-colour silk luster in one spool | Smooth gradient finish straight off the printer | Compatible with all 1.75 mm FDM printers | Adjustable gloss via nozzle temperature and speed | Designed for decorative prints and artistic models</strong></p> <p>The Anycubic PLA Silk Dual Filament in Black/Red is designed for makers who want their prints to stand out with a rich, layered visual effect without any post-processing. The dual-colour silk formula blends black and red into a seamless gradient that shifts and catches the light as the model rotates, giving finished pieces a premium, almost metallic sheen. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed increases filament fluidity for a high-gloss, silky surface, while cooler, faster settings yield a softer lustre. The filament is compatible with any 1.75 mm FDM printer and works at a printing temperature of 210–240 °C with a heated bed set to 55–56 °C and a recommended print speed of 50–250 mm/s. Dry the spool at 55–65 °C for 6–8 hours before use to ensure clean, consistent extrusion. Ideal for decorative parts, fan art, and artistic models where visual impact matters.</p> <h3>Features</h3> <ul> <li>Dual-colour silk PLA combines Black (#212721) and Red (#D22630) in a single strand for eye-catching gradient prints</li> <li>Silk-like surface luster shifts across the colour spectrum as the model is rotated, adding depth and a premium finish</li> <li>Controllable gloss — adjust nozzle temperature and print speed to dial in high-gloss or softer lustre results</li> <li>Compatible with all 1.75 mm FDM printers; no specialist hardware required</li> <li>Supports intelligent identification when used with compatible Anycubic ACE Pro systems for automatic print-parameter recognition</li> <li>Certified to RoHS, REACH, and SDS standards</li> <li>Recommended for decorative parts, fandom models, and artistic prints</li> </ul> <h3>Specifications</h3> <ul> <li>Colour: Black Red (#212721,#D22630)</li> <li>Dry Out Before Use: Recommended</li> <li>Drying Condition: 55-65℃, 6-8h</li> <li>ACE Compatibility: Compatible</li> <li>Nozzle Size: Recommended 0.4 mm or above</li> <li>Printing Temperature: 210-240 ℃</li> <li>Heated Bed Temperature: 55-56 ℃</li> <li>Recommended Printing Speed: 50-250 mm/s</li> <li>Maximum Volume Speed (Flow Rate): 8 mm³/s</li> <li>Density: 1.22 g/cm³</li> <li>Melt Index: 9±1 g/10 min (190℃/2.16kg)</li> <li>Melting Point Temperature: 164 ℃</li> <li>Vicat Softening Temperature: 54 ℃</li> <li>Heat Deflection Temperature (0.45MPa): 53 ℃</li> <li>Young’s Modulus: 2000±200 MPa</li> <li>Tensile Strength: 37±4 MPa</li> <li>Elongation at Break: 28±5%</li> <li>Bending Modulus: 2400±160 MPa</li> <li>Bending Strength: 66±4 MPa</li> <li>lzod lmpact Strength (X-Y): 20±2 kJ/m²</li> <li>Tensile Strength (Z): 12±4 MPa</li> <li>Filament Type: Aesthetic filaments</li> <li>Recommend to Print: Decorative parts, fandom, artworks</li> <li>Intelligent Identification: Supported</li> <li>Reusable Filament Spool: Supported</li> <li>Size: 1KG</li> </ul> <h3>What's in the Box</h3> <ul> <li>Anycubic PLA Silk Dual Filament 1kg – Black/Red x1</li> </ul>