Anycubic PC Filament 1kg – Translucent White

What this part is

<p><strong>Engineering-grade PC filament | High impact and heat resistance | Smooth, lustrous surface finish | 1kg spool</strong></p> <p>The Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270–290°C with a heated bed of 100–120°C, and supports print speeds of 40–250 mm/s. With a heat deflection temperature of 110°C and strong mechanical properties — including a tensile strength of 65±6 MPa and an Izod impact strength of 30±12 kJ/m² — it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80°C for 8–12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers.</p> <h3>Features</h3> <ul> <li>Engineering-grade PC filament for structural, functional, and outdoor applications</li> <li>Heat deflection temperature of 110°C — resists warping and deformation under prolonged heat</li> <li>Izod impact strength of 30±12 kJ/m² (X-Y) for tough, crack-resistant parts</li> <li>Tensile strength of 65±6 MPa and bending strength of 105±10 MPa</li> <li>Smooth, translucent, and lustrous surface finish</li> <li>Intelligent identification chip supported for compatible Anycubic printers</li> <li>Reusable spool with threaded connection system to reduce filament entanglement</li> <li>Active drying required before use: 80°C for 8–12 hours</li> </ul> <h3>Specifications</h3> <ul> <li>Colour: Translucent White</li> <li>Dry Out Before Use: Required</li> <li>Drying Condition: 80 ℃, 8-12 h</li> <li>ACE Compatibility: Compatible</li> <li>Nozzle Size: Recommended 0.2 mm or above</li> <li>Printing Temperature: 270-290 ℃</li> <li>Heated Bed Temperature: 100-120 ℃</li> <li>Recommended Printing Speed: 40-250 mm/s</li> <li>Maximum Volume Speed (Flow Rate): 12 mm³/s</li> <li>Density: 1.2 g/cm³</li> <li>Melt Index: 15-20 g/10 min (270℃/1.2kg)</li> <li>Melting Point Temperature: 230 ℃</li> <li>Vicat Softening Temperature: 122 ℃</li> <li>Heat Deflection Temperature (0.45MPa): 110 ℃</li> <li>Young’s Modulus: 2550±100 MPa</li> <li>Tensile Strength: 65±6 MPa</li> <li>Elongation at Break: 9±4%</li> <li>Bending Modulus: 2900±150 MPa</li> <li>Bending Strength: 105±10 MPa</li> <li>lzod lmpact Strength (X-Y): 30±12 kJ/m²</li> <li>Tensile Strength (Z): 25±7 MPa</li> <li>Filament Type: Engineering filaments</li> <li>Recommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks</li> <li>Intelligent Identification: Supported</li> <li>Reusable Filament Spool: Supported</li> </ul> <h3>What’s in the Box</h3> <ul> <li>Anycubic PC Filament 1kg – Translucent White x1</li> </ul>